Instructions Blade Exchange
![](http://swissors.ch/cdn/shop/files/Instruction_1.png?v=1716995721)
Loosen the adjustment screw with a slotted screw driver by slightly turning until you feel less resistence
![](http://swissors.ch/cdn/shop/files/Instruction_2.png?v=1716995721)
Open the scissors and unscrew the base blade with a Philips (+) screwdriver
![](http://swissors.ch/cdn/shop/files/Instruction_3.png?v=1716995721)
Slide the base blade out of the base arm
![](http://swissors.ch/cdn/shop/files/Instruction_4.png?v=1716995721)
Turn the scissors around and unscrew the top blade
![](http://swissors.ch/cdn/shop/files/Instruction_5.png?v=1716995721)
Slide out the top blade out of the top arm
![](http://swissors.ch/cdn/shop/files/Instruction_6.png?v=1716995717)
Place a new bottom blade in the base arm by sliding it in and align it with the screw hole
![](http://swissors.ch/cdn/shop/files/Instruction_7.png?v=1716995719)
Add the screw and tighten the top blade firmly
![](http://swissors.ch/cdn/shop/files/Instruction_8.png?v=1716995716)
Place a new top blade in the top arm by sliding it in and align it with the screw hole
![](http://swissors.ch/cdn/shop/files/Instruction_9.png?v=1716995720)
Add the screw and tighten the top blade firmly
![](http://swissors.ch/cdn/shop/files/Instruction_10.png?v=1716995721)
Gently close the scissors while slightly pushing the arms apart. Caution: only touch the frame, place the hand under the base arm and use the thumb on the top frame to give a slight push
![](http://swissors.ch/cdn/shop/files/Instruction_11.png?v=1716995718)
Tighten the adjustment screw until you feel some resistance, then turn another quarter
![](http://swissors.ch/cdn/shop/files/Instruction_12.png?v=1716995719)
Open and close the scissorsa few times
![](http://swissors.ch/cdn/shop/files/Picture_13.png?v=1716995718)
Open the arms completely and wipe the blades with a fabric cloth.
Caution: stabalize the scissors by the handles/4-bar-linkage to avoid the scissors from closing
![](http://swissors.ch/cdn/shop/files/Screenshot_2024-05-29_at_11.16.40.png?v=1716974235)
Done!